Many people may not have a correct understanding of the maintenance methods of the UV glue spraying machine, so today we will explain the maintenance methods of the UV glue spraying machine in detail.

1. When replacing the glue type, you need to clean the pipeline first. First close the feed valve and open the discharge valve. After discharging the remaining rubber from the rubber tank, close the discharge valve, open the feed valve and pour the cleaning solvent into the rubber storage tank, activate the machine, and extrude the solvent according to the usual operation mode. rinse.

2. The lifter of the quantitative cylinder of the machine needs to be lubricated regularly to increase the service life; regularly (once a week) use a grease gun to add 2-3 high-temperature lithium grease to the nozzle.

3. If the air pressure is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check whether the air pressure source is abnormal.

4. Please clean the machine part regularly to increase the service life.

Maintaining the production equipment will save you a lot of unnecessary troubles, so that you will not delay normal production due to sudden problems during the production process, and can also enhance the service life of the dispenser.