Equipped with industrial PC + motion controller and Windows operating system, featuring sound & light fault alarm and menu display.
Programming via manual teaching, simple and efficient operation.
Integrated steel motion platform for stable operation.
X, Y, Z three-axis motion.
Driven by servo motors + ball screws
Running accuracy: 0.02 mm
Automatic glue valve cleaning device.
Special aluminum alloy rails and stainless steel conveyor chains.
Independent coating tank.
Equipped with exhaust gas outlet.
Equipped with SMEMA interface for communication with other equipment.
| Type | Specification | iCoat-8 | iCoat-8A | iCoat-8B |
|---|---|---|---|---|
| Board Handling | Standard WorkArea(mm) | X=450,Y=450 | X=290,Y=450 | X=330,Y=450 |
| Maximum Components Height(mm) | ±90 | |||
| PCBE Edge Clearance(mm) | ≥5 | |||
| Single Spray Width(mm) | 2-30 | |||
| Transmission System | Process Flow | L to R(Standard),R to L(Optional) | ||
| Conveyor Height (mm) | 900±20 | |||
| Conveyor Speed(mm/s) | 20-400 | |||
| Operation System | Valve Configuration | Dual valves arranged in-line with fixed spacing | Four valves arranged in-line in two pairs; spacing between Valve 1 and Valve 3:110-210 mm | Four valves arranged in-line;minimum spacing between adjacent valves:50 mm, maximum spacing between Valve 1 and Valve 4:220 mm |
| Maximum Speed(mm/s) | 800 | |||
| Facility Requirements | Repeatability(mm) | ±0.02 | ||
| Dimensions(mm) | L900×W1300×H1710 | |||
| Weight(kg) | 530 | |||
| Required Air Supply(Mpa) | ≥0.4 | |||
| Exhaust Requirement(m³/min) | 15 | |||
| Input Power | AC220V 50/60HZ | |||
| Control & Operation System | Rated Power(kW) | 2.2 | ||
| Control | IPC&Motion Control Card | |||
| Software | Anda Software with Windows OS | |||
| Programming | Keyboard &Mouse | |||
| Communications Protocol | SMEMA | |||
| Type | Specification | iCoat-8C | iCoat-8F | iCoat-8L |
|---|---|---|---|---|
| Board Handling | Standard WorkArea(mm) | X=280,Y=440 | (Valve vertical)X:250mm,Y:420mm | X:650mm,Y:650mm |
| Maximum Components Height(mm) | ±90 | |||
| PCBE Edge Clearance(mm) | ≥5 | |||
| Single Spray Width(mm) | 2-30 | |||
| Transmission System | Process Flow | L to R(Standard),R to L(Optional) | ||
| Conveyor Height(mm) | 900±20 | |||
| Conveyor Speed(mm/s) | 20-400 | |||
| Operation System | Valve Configuration | Four valves arranged front and rear in two pairs;left-right spacing between paired valves:50-220 mm | Dual valves arranged in-line;valve spacing 160-260 mm,both valves with full-angle tilt capability | Dual valves arranged in-line |
| Maximum Speed(mm/s) | 800 | |||
| Facility Requirements | Repeatability(mm) | ±0.02 | ||
| Dimensions(mm) | L900×W1300×H1710 | |||
| Weight(kg) | 530 | |||
| Required Air Supply (Mpa) | ≥0.4 | |||
| Exhaust Requirement(m³/min) | 15 | |||
| Input Power | AC220V 50/60HZ | |||
| Control & Operation System | Rated Power(kW) | 2.2 | ||
| Control | IPC&Motion Control Card | |||
| Software | Anda Software with Windows OS | |||
| Programming | Keyboard & Mouse | |||
| Communications Protocol | SMEMA | |||
| Type | Specification | iCoat-8M | iCoat-8N | iCoat-8P |
|---|---|---|---|---|
| Board Handling | Standard WorkArea(mm) | X=250,Y=380 | X=310,Y=290 | X=330,Y=450 |
| Maximum Components Height(mm) | ±90 | |||
| PCBE Edge Clearance(mm) | ≥5 | |||
| Single Spray Width(mm) | 2-30 | |||
| Transmission System | Process Flow | L to R(Standard),R to L(Optional) | ||
| Conveyor Height(mm) | 900±20 | |||
| Conveyor Speed(mm/s) | 20-400 | |||
| Operation System | Valve Configuration | Four valves arranged front and rear (two front,two rear),adjustable in X and Y directions;X travel:50-200 mm,Y travel:65-120mm | Dual valves arranged in-line,adjustable spacing 50-240 mm,with 90° switchable orientation between X and Y | Dual valves arranged in-line with valve spacing 50-220 mm |
| Maximum Speed(mm/s) | 800 | |||
| Facility Requirements | Repeatability(mm) | ±0.02 | ||
| Dimensions(mm) | L900×W1300×H1710 | |||
| Weight (kg) | 530 | |||
| Required Air Supply(Mpa) | ≥0.4 | |||
| Exhaust Requirement(m³/min) | 15 | |||
| Input Power | AC220V 50/60HZ | |||
| Control & Operation System | Rated Power(kW) | 2.2 | ||
| Control | IPC&Motion Control Card | |||
| Software | Anda Software with Windows OS | |||
| Programming | Keyboard & Mouse | |||
| Communications Protocol | SMEMA | |||
